Fence Price

Last time I bought fence was around $400 a roll and that's 330 ft. Then 12ft posts every 20ft and then extras for the corners and gate opening ($24 each). So for 600ft you are going to look at around $1800-$2000 in materials. I am not sure of fence but other construction a good rule of thumb is double the material price for a full installed price. So installed I would guess around $4000 plus you need gates.

For a roll of Beckert fence, 330 ft., 8 ft. tall, 4" squares I paid $508 last summer. I have building lumber treated wood posts. 6X6 on corners, brace posts, and gate posts. Line posts are 4X4, all 12 ft. long. I built gates myself from 4X6 boards for frame, 2 swinging 5 ft. wide doors to make a 10 ft. wide gate. My Mennonite church youth boys built mine. A 330 ft pen with partition through middle, door frames for connection man doors, setting posts (in concrete) in approx. 6 hours. I had staked it out, marked where the posts had to go and with skid steer, post digger attached, tractor for stretching, brace wires and all it was done fast. I had to attach fencing to gate frames and eventually cut out the connection doors and finish those. Cost, without labor for it was around $1,500. I have closer post spacing than required and I found the hardware (hinges, locks, staples, 10" nails etc from TSC). to eat up a chunk of cash.

I sell fence. $415/330' roll of 8' Bekaert.